ANCHORAGES & CONNECTORS

KARAM offers a range of Anchorage devices in Webbing, Steel Rope and Metal which can be easily installed over a variety of structures to provide safe anchorage points for working at height where needed. All these Anchorages comply to the latest European Standard EN 795:2012.

AVAILABILITY: In stock

Product Code:  PN 813


Anchorage Wire Rope Slings are highly resistant to wear and can be used around edged structures.

 

Has Minimum Breaking Strength of 23kN.

AVAILABILITY: In stock

Product Code:  PN 809


KARAM provides a wide range of Cross Arm and Concrete Anchor Straps of various configurations and lengths that can be altered as per the requirement.

 

These can be slipped around any concrete structure, or around pillars or poles, and then used successfully as an Anchorage Point.

 

Has Minimum Breaking Strength of 18kN for 3 minutes.

AVAILABILITY: In stock

Product Code:  PN 807


KARAM provides a wide range of Cross Arm and Concrete Anchor Straps of various configurations and lengths that can be altered as per the requirement.

 

These can be slipped around any concrete structure, or around pillars or poles, and then used successfully as an Anchorage Point.

 

Has Minimum Breaking Strength of 18kN for 3 minutes.

AVAILABILITY: In stock

Product Code:  PN 806


KARAM provides a wide range of Cross Arm and Concrete Anchor Straps of various configurations and lengths that can be altered as per the requirement.

 

These can be slipped around any concrete structure, or around pillars or poles, and then used successfully as an Anchorage Point.

 

Has Minimum Breaking Strength of 18kN for 3 minutes.

AVAILABILITY: In stock

Product Code:  PN 805


KARAM provides a wide range of Cross Arm and Concrete Anchor Straps of various configurations and lengths that can be altered as per the requirement.

 

These can be slipped around any concrete structure, or around pillars or poles, and then used successfully as an Anchorage Point.

 

Has Minimum Breaking Strength of 18kN for 3 minutes.

AVAILABILITY: In stock

Product Code:  PN 804


KARAM provides a wide range of Cross Arm and Concrete Anchor Straps of various configurations and lengths that can be altered as per the requirement.

 

These can be slipped around any concrete structure, or around pillars or poles, and then used successfully as an Anchorage Point.

 

Has Minimum Breaking Strength of 18kN for 3 minutes.

AVAILABILITY: In stock

Product Code:  PN 803


KARAM provides a wide range of Cross Arm and Concrete Anchor Straps of various configurations and lengths that can be altered as per the requirement.

These can be slipped around any concrete structure, or around pillars or poles, and then used successfully as an Anchorage Point.

 

Has Minimum Breaking Strength of 18kN for 3 minutes.

 

 

AVAILABILITY: In stock

Product Code:  PN 802


Features:

  • The New KARAM Door Anchor provides a non–intrusive anchor point and can be easily installed inside the interior of a building or window opening enabling the most difficult jobs to get done safely and with confidence.
  • KARAM Door Anchor can be installed by just compressing it against the door or window frame, jamming itself between the two vertical sides.
  • It is made of a highly corrosion resistant Aluminium Alloy.
  • The Arms of the KARAM Door Anchor are adjustable, enabling installation on door / window frames of width from 60 cm to 125 cm.
  • Fast and easy Installation with built in adjustment knob hence no tools or drilling is required.
  • Extremely portable design for easy transport, storage and usage.
  • Provided with two separate eye bolts enabling anchorage by two personnel at the same time.

AVAILABILITY: In stock

Product Code:  SA 48(SW)


Features:

  • KARAM Container Anchor post is meant to provide a temporary anchor for working on top of 20ft and 40ft shipping containers.
  • In addition to be used as a stand alone anchor post, Container Anchor Post can also be used to form a Horizontal Lifeline over the top of container depending upon the requirement of work to be done.
  • Comes with a side lock and tag line arrangement for easy and secure installation by one person only.
  • Consists of side handle with special grip for easy carrying and safe transportation.
  • Can be easily removed without damaging the container.
  • Consists of one swivel eye for anchorage / making connections.

AVAILABILITY: In stock

Product Code:  SA 16


Features:

  • KARAM introduces an anchorage point which is extremely easy to install using a single hand.
  • Designed in a way that it can be removed from the structure, without damaging the structure or anchor, thus allowing reuse.
  • Can be installed through a pre-defined hole of diameter 18-19mm through a drilling depth of 110mm.
  • The flanges are pulled in when the eye of the anchor is pulled allowing the anchor to pass through the hole. When the eye is released, these flanges fan out along the outer part of the concrete wall, and hold the anchor in its place.

AVAILABILITY: In stock

Product Code:  SA 11


Features:

  • KARAM Parapet Anchor provides a safe anchorage point on Parapets and facades for use on various structures.
  • A regular Screw-bolt anchor cannot be used in such places because it may damage the base structure, KARAM Parapet Anchor preserves the look of the parapet and facade, while providing a safe anchorage point.
  • The soft part on the inner side of the flanges also ensures that the Parapet is not damaged.
  • Has adjustable Flanges which makes the device versatile for use on various structures having a width ranging from 60mm to 360mm.

AVAILABILITY: In stock

Product Code:  SA 15A


Features:

  • Provides a movable Anchorage Point using the length of the beam to which it is mounted, to move along with the user.
  • Highly corrosion resistant and easy to install.
  • Comes with adjustable flanges for use on different beam sizes.
  • This trolley allows continuous safe Anchorage by allowing the Anchor Point to travel across the length of the beam, along with the user.
  • The wheels of the trolley provide extremely smooth movement over the beam, over which it is mounted.

AVAILABILITY: In stock

Product Code:  SA 08


Features:

  • It is a temporary transportable Anchor device, and provides an Anchorage Point while being attached safely onto a beam, without penetrating it.
  • The Beam Anchor arm has flanges made of brass, and is adjustable to suit different beam sizes.
  • Once installed, the D-ring on the aluminum bar of the Beam Anchor can be used for connection with a variety of connectors for suitable Anchorage.

AVAILABILITY: In stock

Product Code:  SA 49


Features:

  • The Hinged Steel Roof Anchor has two steel hinged flaps which can be nailed to the roof made of a wooden structure.
  • The steel flaps each having 8 holes which can be nailed on the two sides of the wooden structure to provide a safe anchorage.
  • Comes with a hole dia of 25.4 mm to make it compatible with large opening Snap Hooks.

AVAILABILITY: In stock

Product Code:  SA 12


Features:

  • Designed for fastening into concrete.
  • Used with adhesive capsule 10 HVU M12 x 110 code: 256693
  • Drilling dia recommended for installation-14mm and depth-110mm
  • Durable and easy to install.
  • An anchorage point fastening system comprises a 110 mm long stainless steel eye bolt for fastening into concrete.

AVAILABILITY: In stock

Product Code:  SA 10A


Features:

  • Designed as the intermediary for securing a connecting device to an anchorage point.
  • This forged Steel Anchorage Point is another device that can be bolted on any structure without the help of any additional fastener.
  • Special lengths of studs can also be provided on request.