Karam Africa offers an exhaustive range of Lanyards made of Twisted rope, Kernmantle rope or Webbing, and different Connector combinations, as per the needs of the user.
A Lanyard is described as the connecting element of a system. The Fall Arrest Lanyards incorporate a Shock Absorbing element which is capable of limiting the force felt on the body of the worker to less than 6kN.
Depending upon the specific usage, Lanyards are classified as follows: Work Positioning Lanyards, Restraint Lanyards, Fall Arrest Lanyards and Forked Lanyards
PN244
KARAM introduces a range of Work Positioning Lanyards that can be used by the worker to position himself at a height in a safe and supported manner, and work with both hands free. These Lanyards can be connected to the Lateral D-Rings on the Work Positioning Belts or combination Harnesses and can be easily adjusted for their lengths to suit the application.
- Rope is cross stitched and protected with a strong transparent covering sleeve, which not only protects the ends, but also makes the stitches visible for
easy inspection prior to use. - The loop at one end are protected by an abrasion resistant thimble, which prevents the rope from being damaged by the metallic contact of the connector.
- The rope also has a coloured tracer strand which loses its colour in due course of time, indicating that the Lanyard is now unfit for further use.
- Also available with protective covering sleeve (30cm) to protect the rope from abrasion when the Lanyard is used around a structure in the event of work-positioning.
Material
Made up of Kernmantle Rope of dia 11mm.
Length
Available in length 2m.
Convenience
Equipped with convenient manual ring type adjuster made of Forged Alloy Steel for easy length adjustment.
Attachments
Steel Karabiner PN 112 at both the ends for attachment.
Material:-Kernmantle Rope
Attachments:-PN 112
Minimum Breaking Strength:- 15kN
Dia of Rope11 mm
Length:-2m
Certified to:-
EN 358:1999
PN 245
KARAM introduces a range of Work Positioning Lanyards that can be used by the worker to position himself at a height in a safe and supported manner, and work with both hands free. These Lanyards can be connected to the Lateral D-Rings on the Work Positioning Belts or combination Harnesses and can be easily adjusted for their lengths to suit the application.
- Rope is cross stitched and protected with a strong transparent covering sleeve, which not only protects the ends, but also makes the stitches visible for
easy inspection prior to use. - The loop at one end are protected by an abrasion resistant thimble, which prevents the rope from being damaged by the metallic contact of the connector.
- The rope also has a coloured tracer strand which loses its colour in due course of time, indicating that the Lanyard is now unfit for further use.
- Also available with protective covering sleeve (30cm) to protect the rope from abrasion when the Lanyard is used around a structure in the event of work-positioning.
Material
Made up of Kernmantle Rope of dia 11mm.
Length
Available in length 2m.
Convenience
Equipped with convenient Rope Grab adjuster for easy length adjustment.
Attachments
Steel Karabiner PN 112 at both the ends for attachment.
PN 245(PR)
KARAM introduces a range of Work Positioning Lanyards that can be used by the worker to position himself at a height in a safe and supported manner, and work with both hands free. These Lanyards can be connected to the Lateral D-Rings on the Work Positioning Belts or combination Harnesses and can be easily adjusted for their lengths to suit the application.
- Rope is cross stitched and protected with a strong transparent covering sleeve, which not only protects the ends, but also makes the stitches visible for
easy inspection prior to use. - The loop at one end are protected by an abrasion resistant thimble, which prevents the rope from being damaged by the metallic contact of the connector.
- The rope also has a coloured tracer strand which loses its colour in due course of time, indicating that the Lanyard is now unfit for further use.
- Also available with protective covering sleeve (30cm) to protect the rope from abrasion when the Lanyard is used around a structure in the event of work-positioning.
Material
Made up of Kernmantle Rope of dia 11mm.
Length
Available in length 2m.
Convenience
Equipped with convenient Rope Grab adjuster for easy length adjustment.
Attachments
Steel Karabiner PN 112 at both the ends for attachment.
Material:-Kernmantle Rope
Attachments:-PN 112
Minimum Breaking Strength:- 15kN
Dia of Rope11 mm
Length:-2m
Certified to:-
EN 358:1999
PN 325(30)
KARAM introduces Fall Arrest 30mm Webbing Lanyards made up of 30mm wide polyester webbing from high tenacity polyester yarn
- Consists of Energy Absorber to reduce the impact of fall to less than 6kN.
- The Loops at the end are provided with an abrasion resistant covering. This prevents the webbing from getting damaged by the metallic contact of the connector.
- As these lanyards are made from a webbing, it prevents undue twisting, grime and dust. It is easy to clean and prevents water absorption.
Features:-
Material
Made up of 30mm wide polyester webbing from high tenacity polyester yarn.
Length
Available in length 1.75 m
Attachments
Has Steel Snap Hook PN 124 at both the ends.
Material:- Polyester Webbing
Attachments:-
Harness End: PN 124
Anchorage End: PN 124
Length:-1.75 m
Certified to:-EN 355:2002
PN 329(30)N
KARAM introduces Fall Arrest 30mm Webbing Lanyards made up of 30mm wide polyester webbing from high tenacity polyester yarn
- Consists of Energy Absorber to reduce the impact of fall to less than 6kN.
- The Loops at the end are provided with an abrasion resistant covering. This prevents the webbing from getting damaged by the metallic contact of the connector.
- As these lanyards are made from a webbing, it prevents undue twisting, grime and dust. It is easy to clean and prevents water absorption.
Features:-
Material
Made up of 30mm wide polyester webbing from high tenacity polyester yarn.
Length
Available in length 1.75 m
Attachments
Has Steel Snap Hook PN 124 at one end and Steel Scaffold Hook PN 131N at other end.
Material:- Polyester Webbing
Attachments:-
Harness End: PN 124
Anchorage End: PN 131N
Length:-1.75 m
PN 361(30)N
KARAM also provides a range of Forked Lanyards that can be used to move up or down, or along the sides while remaining connected at all times.
- Consists of Energy Absorber to reduce the impact of fall to less than 6kN.
- The Loops at the end are provided with an abrasion resistant covering. This prevents the webbing from getting damaged by the metallic contact of the
connector. - As these lanyards are made from a webbing, it prevents undue twisting, grime and dust. It is easy to clean and prevents water absorption.
Features:-
Material
Made up of 30mm wide polyester webbing.
Length
Available in length 1.75 m
Attachments
Has Steel Snap Hook PN 124 at one end and two Steel Scaffold Hook PN 131N at other ends.
Material:-
Polyester Webbing
Attachments:-
Harness End:
PN 124
Anchorage End:
PN 131N
Length
1.75 m
Certified to:-
EN 355:2002, VG 11/RfUCNB/P/11.063
PN 361(30)
KARAM also provides a range of Forked Lanyards that can be used to move up or down, or along the sides while remaining connected at all times.
- Consists of Energy Absorber to reduce the impact of fall to less than 6kN.
- The Loops at the end are provided with an abrasion resistant covering. This prevents the webbing from getting damaged by the metallic contact of the
connector. - As these lanyards are made from a webbing, it prevents undue twisting, grime and dust. It is easy to clean and prevents water absorption.
Features:-
Material
Made up of 30mm wide polyester webbing.
Length
Available in length 1.75 m
Attachments
Has Steel Snap Hook PN 124 at all the ends.
Material:-
Polyester Webbing
Attachments:-
Harness End:
PN 124
Anchorage End:
PN 124
Length
1.75 m
Certified to:-
EN 355:2002, VG 11/RfUCNB/P/11.063
TL 01(N)
Accidents are also known to occur when tools fall from the hand of a worker who is using them while working at a height. KARAM offers Tools Lanyards with improvised elasticated webbing which can be connected to the belt of the Harness at one end and has a loop at the other end to hold a tool of weight of up to 10kg.
Features:-
- Made of 20mm wide tubular webbing.
- Provided with a light-weight Karabiner for attachment to the user’s belt.
- Relaxed length : 85 cm
- Expanded length : 135 cm
- Convenient stretch-lanyard for tool holding.
TL 02(N)
Accidents are also known to occur when tools fall from the hand of a worker who is using them while working at a height. KARAM offers Tools Lanyards with improvised elasticated webbing which can be connected to the belt of the Harness at one end and has a loop at the other end to hold a tool of weight of up to 10kg.
Features:-
- Made of 20mm wide tubular webbing.
- Provided with a light-weight Karabiner for attachment to the user’s belt.
- Relaxed length : 85 cm
- Expanded length : 135 cm
- Convenient “Y’ leg stretch-lanyard for tool holding, allow the user to attach and carry 2 tools.