Product Code: PN244 Categories: , ,

Work Positioning Lanyards With Ring Adjuster

KARAM introduces a range of Work Positioning Lanyards that can be used by the worker to position himself at a height in a safe and supported manner, and work with both hands free. These Lanyards can be connected to the Lateral D-Rings on the Work Positioning Belts or combination Harnesses and can be easily adjusted for their lengths to suit the application.

  • Rope is cross stitched and protected with a strong transparent covering sleeve, which not only protects the ends, but also makes the stitches visible for
    easy inspection prior to use.
  • The loop at one end are protected by an abrasion resistant thimble, which prevents the rope from being damaged by the metallic contact of the connector.
  • The rope also has a coloured tracer strand which loses its colour in due course of time, indicating that the Lanyard is now unfit for further use.
  • Also available with protective covering sleeve (30cm) to protect the rope from abrasion when the Lanyard is used around a structure in the event of work-positioning.


Made up of Kernmantle Rope of dia 11mm.


Available in length 2m.


Equipped with convenient manual ring type adjuster made of Forged Alloy Steel for easy length adjustment.


Steel Karabiner PN 112 at both the ends for attachment.


Material:-Kernmantle Rope

Attachments:-PN 112

Minimum Breaking Strength:- 15kN

Dia of Rope11 mm


Certified to:-

EN 358:1999