ROPE ACCESS & RESCUE

Rope Access technique of movement on a rope would only be used when traditional access systems cannot be installed. The basic Rope Access equipment should be used with a Fall Protection System. Rescue technique is used in an emergency hence it is naturally the most sensitive. This intervention can be performed by the user if he/she is conscious and has the necessary equipment for self-extraction, or by a helper. In this situation, it is necessary to reach the victim, release him/her in complete safety and move the person upwards or downwards.
Karam Africa offers a range of Rope Access equipment such as single pulley attachments, spreader bars, grip descenders and ringing plates

AVAILABILITY: In stock

STS 01(N)


Features

  • Specially designed to help relieve the negative effects of Suspension Trauma.
  • Compact and light-weight. Does not hamper with the activity of the worker while at work.
  • Easy to attach to the harness with the help of the textile loop and velcro provided.

Steps to Use

  • Unzip the pouches fitted on both sides of the harness.
  • Hold the 2 straps together.
  • connect the straps with each other making a loop with the help of the easy-to-use buckle.
  • Put your feet into the loop.
  • Stand onto the loop, so that the thigh straps are free to move.
  • Adjust the sit strap towards the front to release pressure and give a sitting posture.

AVAILABILITY: In stock

AP 011A


KARAM offers a range of pulleys over which the rope is passed through to make it easier to lift.

AVAILABILITY: In stock

AP 012(SS)


KARAM offers a range of pulleys over which the rope is passed through to make it easier to lift.

AVAILABILITY: In stock

AP 013(SS)


KARAM offers a range of pulleys over which the rope is passed through to make it easier to lift.

AVAILABILITY: In stock

AP 014(SS)


KARAM offers a range of pulleys over which the rope is passed through to make it easier to lift.

AVAILABILITY: In stock

IMP 003


Features:-

  • To be used in conjunction with the KARAM Harness for raising and lowering a person during rescue.
  • The attached webbing loops can be used to secure victim’s arms when lifting or lowering.
  • Keeps victim upright during rescue.
  • Made from polyester webbing.
  • Built-in spreader bar.
  • Comes with adjustment buckles for adjusting all straps easily for a good fit.
  • Consists of user friendly self-locking Steel Snap Hooks.
  • Has High strength D-Ring tie-off point.

AVAILABILITY: In stock

IMP 005


Features:

Design:

  • Ergonomic and comfortable working chair.
  • For vertical ascent and descent.
  • Equiped with Steel Screw Locking Karabiner PN 112 for anchorage.
  • Is used in conjunction with spreader bar IMP 003.

 

AVAILABILITY: In stock

PN 401


KARAM Grip Descender is a light-weight, easy to operate device that is used with a Suspension Harness (Magna 3). For additional comfort an Easy Seat can be used with the Suspension Harness. It is a manually operated controlled descent device, ideal for descent on a single rope.

Various work applications like window cleaning, exterior facade maintenance, crack filling, bridge expansion etc., require the worker to be suspended from height. KARAM Grip Descender is a light-weight, easy to operate device that is used with a Suspension Harness (Magna 3). For additional comfort an Easy Seat can be used with the Suspension Harness.

 

It is a manually operated controlled descent device, ideal for descent on a single rope.

 

It is important to use appropriate fall arrest system along with the KARAM Grip Descender.

 

This is also an ideal device which can be used by trained personnel in an emergency situation for Rescue, to lower a casualty from an elevated work station.

 

Features:
Self Braking System
It is equipped with a unique self braking system which initiates the brake as soon as the handle is released, or clasped too tightly (in panic situations).

Polymer Coated Cover

Equipped with polymer coated cover to protect the user from the heat generated during descent.

 

Light And Corrosion Resistant

Extremely light in weight and highly corrosion resistant.

AVAILABILITY: In stock

PN 402(A)


Features:
Webbing

44mm Polyester Webbing.

 

Use

Attaches to the Ascender for Rope Ascent.

 

Adjustable Length

Length easily adjusted with the Combination Buckles.

 

Abrasion-Resistant

Underfoot strap is abrasion -resistant and is slightly rigid to make it easier to step into.

AVAILABILITY: In stock

PN 402(L), PN 402(R)


Light and Corrosion Resistant Extremely light in weight and highly corrosion resistant. The unique design of the Cam allows optimal grip on the rope without damaging it. The Moulded Grip on the handle is ergonomically designed to allow easy and effortless grip. It is available as both right and left hand models. PN402L PN402R

Features:
Light and Corrosion Resistant

Extremely light in weight and highly corrosion resistant.

Device Design

  • The unique design of the Cam allows optimal grip on the rope without damaging it.
  • The Moulded Grip on the handle is ergonomically designed to allow easy and effortless grip.
  • It is available as both right and left hand models.

 

PN402L

PN402R

AVAILABILITY: In stock

PN 403


KARAM provides an easy-to-use Respac Recovery Stretcher for safe carrying of the wounded. The backpackable Karam Respac Recovery Stretcher has been configured as an extremely flexible rescue system useable in any context where patient transport is needed and particularly useful in morphologic and difficult climatic situations where a fast recovery is desired.

 

AVAILABILITY: In stock

PN 405


Features:
Simple and Easy to use

The Rope runs smoothly through the device and is extremely easy to operate.

 

Compatibility with Rope

Ideal for use on 10-12mm dia Kernmantle Rope.

 

Device Efficiency

The device does not get hot like other friction devices because of the ability to dissipate heat efficiently.

AVAILABILITY: In stock

PN 431


Features:
Simple and Easy to use

The Rope runs smoothly through the device and is extremely easy to operate.

 

Compatibility with Rope

Can be used with any dia Kernmantle Rope.

 

Device Efficiency

The device does not get hot like other friction devices because of the ability to dissipate heat efficiently.

AVAILABILITY: In stock

PRP 01


KARAM rigging Plate is designed to organize and provide multiple anchor points in multiple directions for superior versatility. PRP 01 is a compact three hole anchor plate for small haul systems.

 

Multiple Anchor Points

KARAM Rigging Plate is designed to organize and provide multiple anchor points in multiple directions for superior versatility.

 

Design

  • PRP 01 is a compact three hole anchor plate for small haul systems.
  • PRP 02 is a versatile five hole anchor plate for big rigging.
  • The holes in the anchor have sufficient space to allow easy pass through of locking sheaves of Karabiners to pass through.

 

Dia

Eye of the plate is capable to connect the Karabiners having dia of 19mm.

AVAILABILITY: In stock

PRP 02


KARAM rigging Plate is designed to organize and provide multiple anchor points in multiple directions for superior versatility. PRP 02 is a versatile five hole anchor plate for big rigging.

 

Multiple Anchor Points

KARAM Rigging Plate is designed to organize and provide multiple anchor points in multiple directions for superior versatility.

 

Design

  • PRP 01 is a compact three hole anchor plate for small haul systems.
  • PRP 02 is a versatile five hole anchor plate for big rigging.
  • The holes in the anchor have sufficient space to allow easy pass through of locking sheaves of Karabiners to pass through.

 

Dia

Eye of the plate is capable to connect the Karabiners having dia of 19mm.