KARAM provides a vast range of Temporary Horizontal and Vertical Anchorage Line Systems that are engineered to be easily installed and removed for use on short-term jobs, and are perfect for areas where activities are infrequent. KARAM perfectly designed its Temporary Lifelines to address all the needs keeping OSHA fall protection regulations in mind. These lifelines provide a suitable and safe anchorage to the user whenever required and are both highly durable and reliable.
Applicable but not limited to the following industries:
Construction; Telecommunication; Heavy Metal Industries; Power Transmission; Cement; Wind Mill; Refinery.
TEMPORARY HORIZONTAL ANCHORAGE LINE SYSTEMS
PN 3000(BC)
The Horizon range of Temporary Horizontal Lifelines, made of textile webbing and rope which are extremely easy to carry and install wherever required. These Anchorage Lifeline systems by KARAM provide a suitable and safe anchorage horizontally along the entire length.
Features:
- Consists of KARAM Ratchet Tensioner that allows easy tensioning of the lifeline between two structures.
- Has 2 Cross Arm Straps PN 804 each to tie off to the structure where the anchorage is required.
- The complete system is supplied in a bag, which is permanently attached to the assembly and also enables the user to easily carry the system with the help of comfortable shoulder hanging straps provided in the bag.
- Once the lifeline is fitted, the user can easily connect the lanyard attached to his harness with the lifeline using a Karabiner. This allows movement along the length while keeping the user secured and safe at all times.
Webbing Material: Polyester webbing of 30mm
Attachment Ends: Both ends – Stitched loops with PN 113
Max. No. of Users: up to 2 users
Max. Span Length: up to 20.0 mtrs
Certified to: EN 795:2012 TS 16415:2013 Type B and C (for up to 2 users)
PN 3001
Key Features
- Quick and easy to install, also reusable
- PN3001 has 4 steel O-rings to enable the user to easily attach the lanyard of his harness to the lifeline using a karabiner
- Consists of a tension indicator for creating an adequate tension in the line. Once the required tension is achieved, the disc on the tension indicator gets released, indicating the line is ready to use
- Has swivel connector-specially designed to prevent any twisting of the rope
- Minimum breaking strength: 25kN
Certification:
IS 3521(Part 8):2021, EN 795:2012 Type C TS 16415:2013 Type C
PN 3001 (C)
Key Features
- Quick and easy to install, also reusable
- PN3001(C) has 4 cross over anchors SA29 made of stainless steel to allow easy crossing over between users, and prevent any disengagement from the lifeline, ensuring 100% tie off at all times
- Consists of a tension indicator for creating an adequate tension in the line. Once the required tension is achieved, the disc on the tension indicator gets released, indicating the line is ready to use
- Has swivel connector-specially designed to prevent any twisting of the rope
- Minimum breaking strength: 25kN
Certification:
IS 3521(Part 8):2021, EN 795:2012 Type C TS 16415:2013 Type C
PN 3002
Key Features
- PN3002 has 2 steel O-rings to enable the user to easily attach the lanyard of his harness to the lifeline using a karabiner
- Has a unique tension indicator in which once the required tension is achieved, the disc on the tension indicator gets released, indicating the line is ready to use
- Minimum breaking strength: 25kN
- Once fitted, you can easily put back the extra rope not deployed along the length, into the bag
Certification:
EN 795:2012 Type C TS 16415:2013 Type C
PN 3002 (C)
Key Features
- PN3002(C) has 2 cross over anchors (SA29) made of stainless steel to allow easy crossing over between users, and prevent any disengagement from the lifeline, ensuring 100% tie off at all times
- Has a unique tension indicator in which once the required tension is achieved, the disc on the tension indicator gets released, indicating the line is ready to use
- Minimum breaking strength: 25kN
- Once fitted, you can easily put back the extra rope not deployed along the length, into the bag
Certification:
EN 795:2012 Type C TS 16415:2013 Type C
PN 4001N
The Horizontal Lifeline used to protect the workers working in the horizontal plane who may not have continuous access to suitable anchorage points. The innovative design allows the user to quickly install and dismantle the lifeline.
Features:
- Housing made of durable and high strength polymer.
- Handy and portable design.
- Extremely easy to install; retractable lifeline is simply pulled out for installation up to the required length and retracted back with the built-in
winch into an easy-to-carry case. - Inbuilt Winch for easy retraction of rope back into the housing/case for fast, simple and safe dismantle. Hence, eliminating large and bulky coils of cable that are difficult to set-up and store.
- Has inbuilt shock absorption mechanism to limit the impact forces during fall arrest.
- Molded and padded handle for easy carriage.
- Comes with Hook PN 162 at the termination end for easy connection.
- Can be used by maximum 2 users simultaneously.
- Has tension indicator to indicate required tension in the line.
- Impact Indicator on the hook turns red in the case of a fall.
SA 28
The portable and extremely easy to install Anchor Post for installation of Horizontal Line on steel construction I-Beam sections.
Features:
- Span lengths are adjustable with the help of intermediates.
- The post comes with a unique tilted design to allow unobstructed movement of the user during the construction of roofs or metal structures.
- Can be used by maximum 4 users simultaneously.
- Compatible with beam having flange width of 150 mm to 220 mm.
- Comes with universal extremity plate PN 4000(09) for making connections.
TEMPORARY VERTICAL ANCHORAGE LINE SYSTEMS
PN 2000A
Key Features
- Openable rope grab device
- Made up of high strength galvanized steel
- Moves freely along the Polyamide twisted rope anchorage line (14mm to 16mm)
- Attached at its eye with the user, while he moves up and down
- Has coloured tracer yarn which loses its colour in due course of time, to show that the rope is now unfit for further use
Certification:
EN 353-2:2002, IS 3521(Part 4):2021
PN 2000B
Key Features
- Openable rope grab device
- Fall arrester with energy absorber
- Made up of high strength galvanized steel
- Moves freely along the Polyamide twisted rope anchorage line (14mm to 16mm)
- Attached at its eye with the user, while he moves up and down
- Has coloured tracer yarn which loses its colour in due course of time, to show that the rope is now unfit for further use
Certification:
EN 353-2:2002, IS 3521(Part 4):2021
PN 2000C
Key Features
- Openable rope grab device
- Fall arrester with spacing strap
- Made up to high strength galvanized steel
- Moves freely along the Polyamide twisted rope anchorage line (14mm to 16mm)
- Attached at its eye with the user, while he moves up and down
- Has coloured tracer yarn which loses its colour in due course of time, to show that the rope is now unfit for further use
Certification:
EN 353-2:2002, IS 3521(Part 4):2021
RG 01
Only KARAM Openable Rope Grab Fall Arrester comes with the unique antigravity locking system.
Allows the user to go up but not slide down accidently. Keeps in stationary position when locked.
• Fail proof design ensures correct usage.
• Arrests fall within very short fall distance.
• Equipped with a double security opening system, hence will not open unless a deliberate action taken.
PN 2003
Key Features
- This system is an ideal fall restraint device for use while working on platforms and roofs
- Rope grab is not detachable from the rope. This gives an advantage that the worker does not lose the device when the equipment is not in use
- Has one side loop for connector and a stop knot on the other side
- Available in lengths of 5m to 100m
Certification:
EN 353-2:2002, AS/NZS 1891.3-2020, IS 3521(Part 4):2021
PN 2004, PN 2004EC
Key Features
- Consists of highly corrosion resistant rope grab, hence ideal for the marine and offshore atmosphere
- Rope grab is not detachable from the rope. This gives an advantage that the worker does not lose the device when the equipment is not in use
- Has one side loop for connector and a stop knot on the other side
- Available in lengths of 5m to 100m
- PN 2004 consists of highly corrosion resistant Stainless Steel Rope Grab
- PN 2004EC comes with Alloy Steel Rope Grab
Certification:
EN 353-2:2002, IS 3521(Part 4):2021
PN 2005
Key Features
- Both these systems have one side loop for connector and a stop knot on the other side. The termination is cross-stitched, and is protected with a strong transparent covering sleeve which not only protects the end but also makes the stitches visible for easy inspection prior to use
- Abrasion resistant thimble at termination to protect the loops from being damaged by metallic contact
- Available in lengths of 5m to 100m
Certification:
EN 353-2:2002, IS 3521(Part 4):2021
PN 2005(AP)
Key Features
- Both these systems have one side loop for connector and a stop knot on the other side. The termination is cross-stitched, and is protected with a strong transparent covering sleeve which not only protects the end but also makes the stitches visible for easy inspection prior to use
- Abrasion resistant thimble at termination to protect the loops from being damaged by metallic contact
- Available in lengths of 5m to 100m
Certification:
EN 353-2:2002, IS 3521(Part 4):2021
PN 2006
Key Features
- In both these systems, the rope grab (RG07) has a manual lock position to allow work on an inclined roof, and also restraint positioning
- PN2006 has energy absorber at one end and a stop knot at other end whereas PN2006(11) has one side loop for connector and a stop knot on the other side
- Abrasion resistant thimble to protect the loops from being damaged by metallic contact
- The termination is cross-stitched and protected by a strong transparent covering sleeve which not only protects the end but also makes the stitches visible for easy inspection before use
- Available in lengths of 5m to 100m
Certification:
EN 353-2:2002
PN 2006(11)
Key Features
- In both these systems, the rope grab (RG07) has a manual lock position to allow work on an inclined roof, and also restraint positioning
- PN2006 has energy absorber at one end and a stop knot at other end whereas PN2006(11) has one side loop for connector and a stop knot on the other side
- Abrasion resistant thimble to protect the loops from being damaged by metallic contact
- The termination is cross-stitched and protected by a strong transparent covering sleeve which not only protects the end but also makes the stitches visible for easy inspection before use
- Available in lengths of 5m to 100m
Certification:
EN 353-2:2002, EN 12841:2006 Type A
PN 2007, PN 2007(AP)
Key Features
- Both these systems have one side loop for connector and a stop knot on the other side. The termination is spliced and protected by a strong transparent covering sleeve which not only protects the end but also makes the splicing visible for easy inspection before use
- PN2007(AP) comes with anti-panic features
- Abrasion resistant thimble to protect the loops from being damaged by metallic contact
- Available in lengths of 5m to 100m
Certification:
EN 353-2:2002, IS 3521(Part 4):2021
PN 2008, PN 2008(AP)
Key Features
- Both these systems have one side loop for connector and a stop knot on the other side. The termination is cross stitched and protected by a strong transparent covering sleeve which not only protects the end but also makes the stitches visible for easy inspection before use
- PN2008(AP) comes with anti-panic features
- Abrasion resistant thimble to protect the loops from being damaged by metallic contact
- Available in lengths of 5m to 100m
Certification:
EN 353-2:2002, IS 3521(Part 4):2021
PN 2009, PN 2009(F), PN 2009(SA)
Key Features
- Above systems have one side loop for connector and a stop knot on the other side
- Abrasion resistant thimble at termination to protect the loops from being damaged by metallic contact
- The termination is cross-stitched, and is protected with a strong transparent covering sleeve which not only protects the end but also makes the stitches visible for easy inspection before use
- Available in lengths of 5m to 100m
Certification:
EN 353-2:2002, IS 3521(Part 4):2021
PN 2010, PN 2010 (AP)
Key Features
- Both these systems have one side loop for connector and a stop knot on the other side. The termination is stitched and protected with a strong transparent covering sleeve which not only protects the end but also makes the stitches visible for easy inspection before use
- PN2010(AP) comes with anti-panic features
- Abrasion resistant thimble at termination to protect the loops from being damaged by metallic contact
- Available in lengths of 5m to 100m
Certification:
EN 353-2:2002, IS 3521(Part 4):2021
TEXTILE ROPE FOR ANCHORAGE
11mm
PN 9200 (KRKD 11)
KARAM introduces Textile Anchorage Lines in both Twisted and Kernmantle Ropes made of polyamide and polyester, available in different lengths to suit application. These Anchorage Lines are certified as a system only when used with specific KARAM Rope Grab Fall Arresters.
Features:
- Made of Polyester Kernmantle Rope of dia 11mm.
- One side loop; other side end stop knot.
PN 950 (KRKD 11)
KARAM introduces Textile Anchorage Lines in both Twisted and Kernmantle Ropes made of polyamide and polyester, available in different lengths to suit application. These Anchorage Lines are certified as a system only when used with specific KARAM Rope Grab Fall Arresters.
Features:
- Made of Polyester Kernmantle Rope of dia 11mm.
- One side loop; other side end stop knot.
| Anchorage Line | Ref. | Length |
|---|---|---|
| Kernmantle Rope Anchorage Line (11mm) |
PN 920 (KRKD 11) | 20 mtrs |
| PN 930 (KRKD 11) | 30 mtrs | |
| PN 950 (KRKD 11) | 50 mtrs | |
| PN 9200 (KRKD 11) | 200 mtrs |
PN 950 (KRKD 11)
KARAM introduces Textile Anchorage Lines in both Twisted and Kernmantle Ropes made of polyamide and polyester, available in different lengths to suit application. These Anchorage Lines are certified as a system only when used with specific KARAM Rope Grab Fall Arresters.
Features:
- Made of Polyester Kernmantle Rope of dia 11mm.
- One side loop; other side end stop knot.
PN 930 (KRD11)
KARAM introduces Textile Anchorage Lines in both Twisted and Kernmantle Ropes made of polyamide and polyester, available in different lengths to suit application. These Anchorage Lines are certified as a system only when used with specific KARAM Rope Grab Fall Arresters.
Features:
- Made of Polyester Kernmantle Rope of dia 11mm.
- One side loop; other side end stop knot.
PN 920 (KRAL 11)
KARAM introduces Textile Anchorage Lines in both Twisted and Kernmantle Ropes made of polyamide and polyester, available in different lengths to suit application. These Anchorage Lines are certified as a system only when used with specific KARAM Rope Grab Fall Arresters.
Features:
- Made of Polyester Kernmantle Rope of dia 11mm.
- One side loop; other side end stop knot.
12mm
PN 950 (KRAL 12)
KARAM introduces Textile Anchorage Lines in both Twisted and Kernmantle Ropes made of polyamide and polyester, available in different lengths to suit application. These Anchorage Lines are certified as a system only when used with specific KARAM Rope Grab Fall Arresters.
Features:-
- Made of Polyester Kernmantle Rope of dia 12mm.
- One side loop; other side end stop knot.
PN 930 (KRAL 12)
KARAM introduces Textile Anchorage Lines in both Twisted and Kernmantle Ropes made of polyamide and polyester, available in different lengths to suit application. These Anchorage Lines are certified as a system only when used with specific KARAM Rope Grab Fall Arresters.
Features:-
- Made of Polyester Kernmantle Rope of dia 12mm.
- One side loop; other side end stop knot.
PN 920 (KRAL 12)
KARAM introduces Textile Anchorage Lines in both Twisted and Kernmantle Ropes made of polyamide and polyester, available in different lengths to suit application. These Anchorage Lines are certified as a system only when used with specific KARAM Rope Grab Fall Arresters.
Features:-
- Made of Polyester Kernmantle Rope of dia 12mm.
- One side loop; other side end stop knot.
14mm
PN 920
KARAM introduces Textile Anchorage Lines in both Twisted and Kernmantle Ropes made of polyamide and polyester, available in different lengths to suit application. These Anchorage Lines are certified as a system only when used with specific KARAM Rope Grab Fall Arresters.
Features:
- Made of 3-strand Polyamide Twisted Rope of dia 14mm.
- One side loop; other side stop knot.
PN920 14mm
PN920 16mm
PN930 14mm
PN930 16mm
PN950 14mm
PN950 16mm
PN 950
KARAM introduces Textile Anchorage Lines in both Twisted and Kernmantle Ropes made of polyamide and polyester, available in different lengths to suit application. These Anchorage Lines are certified as a system only when used with specific KARAM Rope Grab Fall Arresters.
Features:
- Made of 3-strand Polyamide Twisted Rope of dia 14mm.
- One side loop; other side stop knot.
PN 930
KARAM introduces Textile Anchorage Lines in both Twisted and Kernmantle Ropes made of polyamide and polyester, available in different lengths to suit application. These Anchorage Lines are certified as a system only when used with specific KARAM Rope Grab Fall Arresters.
Features:-
- Made of 3-strand Polyamide Twisted Rope of dia 14mm.
- One side loop; other side stop knot.
| Anchorage Line | Ref. | Length |
|---|---|---|
| Twisted Rope Anchorage Line (14mm) |
PN 920 | 20 mtrs |
| PN 930 | 30 mtrs | |
| PN 950 | 50 mtrs | |
| Twisted Rope Anchorage Line (16mm) |
PN 920 | 20 mtrs |
| PN 930 | 30 mtrs | |
| PN 950 | 50 mtrs |
16mm
PN 950
KARAM introduces Textile Anchorage Lines in both Twisted and Kernmantle Ropes made of polyamide and polyester, available in different lengths to suit application. These Anchorage Lines are certified as a system only when used with specific KARAM Rope Grab Fall Arresters.
Features:
- Made of 3-strand Polyamide Twisted Rope of dia 14mm.
- One side loop; other side stop knot.
PN 930
KARAM introduces Textile Anchorage Lines in both Twisted and Kernmantle Ropes made of polyamide and polyester, available in different lengths to suit application. These Anchorage Lines are certified as a system only when used with specific KARAM Rope Grab Fall Arresters.
Features:
- Made of 3-strand Polyamide Twisted Rope of dia 14mm.
- One side loop; other side stop knot.
PN 920
KARAM introduces Textile Anchorage Lines in both Twisted and Kernmantle Ropes made of polyamide and polyester, available in different lengths to suit application. These Anchorage Lines are certified as a system only when used with specific KARAM Rope Grab Fall Arresters.
Features:-
- Made of 3-strand Polyamide Twisted Rope of dia 14mm.
- One side loop; other side stop knot.