PN 3002
Key Features
- PN3002 has 2 steel O-rings to enable the user to easily attach the lanyard of his harness to the lifeline using a karabiner
- Has a unique tension indicator in which once the required tension is achieved, the disc on the tension indicator gets released, indicating the line is ready to use
- Minimum breaking strength: 25kN
- Once fitted, you can easily put back the extra rope not deployed along the length, into the bag
Certification:
EN 795:2012 Type C TS 16415:2013 Type C
PN 3002 (C)
Key Features
- PN3002(C) has 2 cross over anchors (SA29) made of stainless steel to allow easy crossing over between users, and prevent any disengagement from the lifeline, ensuring 100% tie off at all times
- Has a unique tension indicator in which once the required tension is achieved, the disc on the tension indicator gets released, indicating the line is ready to use
- Minimum breaking strength: 25kN
- Once fitted, you can easily put back the extra rope not deployed along the length, into the bag
Certification:
EN 795:2012 Type C TS 16415:2013 Type C
PN 3001 (C)
Key Features
- Quick and easy to install, also reusable
- PN3001(C) has 4 cross over anchors SA29 made of stainless steel to allow easy crossing over between users, and prevent any disengagement from the lifeline, ensuring 100% tie off at all times
- Consists of a tension indicator for creating an adequate tension in the line. Once the required tension is achieved, the disc on the tension indicator gets released, indicating the line is ready to use
- Has swivel connector-specially designed to prevent any twisting of the rope
- Minimum breaking strength: 25kN
Certification:
IS 3521(Part 8):2021, EN 795:2012 Type C TS 16415:2013 Type C
PN 2000B
Key Features
- Openable rope grab device
- Fall arrester with energy absorber
- Made up of high strength galvanized steel
- Moves freely along the Polyamide twisted rope anchorage line (14mm to 16mm)
- Attached at its eye with the user, while he moves up and down
- Has coloured tracer yarn which loses its colour in due course of time, to show that the rope is now unfit for further use
Certification:
EN 353-2:2002, IS 3521(Part 4):2021
PN 2000C
Key Features
- Openable rope grab device
- Fall arrester with spacing strap
- Made up to high strength galvanized steel
- Moves freely along the Polyamide twisted rope anchorage line (14mm to 16mm)
- Attached at its eye with the user, while he moves up and down
- Has coloured tracer yarn which loses its colour in due course of time, to show that the rope is now unfit for further use
Certification:
EN 353-2:2002, IS 3521(Part 4):2021
PN 2004, PN 2004EC
Key Features
- Consists of highly corrosion resistant rope grab, hence ideal for the marine and offshore atmosphere
- Rope grab is not detachable from the rope. This gives an advantage that the worker does not lose the device when the equipment is not in use
- Has one side loop for connector and a stop knot on the other side
- Available in lengths of 5m to 100m
- PN 2004 consists of highly corrosion resistant Stainless Steel Rope Grab
- PN 2004EC comes with Alloy Steel Rope Grab
Certification:
EN 353-2:2002, IS 3521(Part 4):2021
PN 2005
Key Features
- Both these systems have one side loop for connector and a stop knot on the other side. The termination is cross-stitched, and is protected with a strong transparent covering sleeve which not only protects the end but also makes the stitches visible for easy inspection prior to use
- Abrasion resistant thimble at termination to protect the loops from being damaged by metallic contact
- Available in lengths of 5m to 100m
Certification:
EN 353-2:2002, IS 3521(Part 4):2021
PN 2005(AP)
Key Features
- Both these systems have one side loop for connector and a stop knot on the other side. The termination is cross-stitched, and is protected with a strong transparent covering sleeve which not only protects the end but also makes the stitches visible for easy inspection prior to use
- Abrasion resistant thimble at termination to protect the loops from being damaged by metallic contact
- Available in lengths of 5m to 100m
Certification:
EN 353-2:2002, IS 3521(Part 4):2021
PN 2007, PN 2007(AP)
Key Features
- Both these systems have one side loop for connector and a stop knot on the other side. The termination is spliced and protected by a strong transparent covering sleeve which not only protects the end but also makes the splicing visible for easy inspection before use
- PN2007(AP) comes with anti-panic features
- Abrasion resistant thimble to protect the loops from being damaged by metallic contact
- Available in lengths of 5m to 100m
Certification:
EN 353-2:2002, IS 3521(Part 4):2021
PN 2008, PN 2008(AP)
Key Features
- Both these systems have one side loop for connector and a stop knot on the other side. The termination is cross stitched and protected by a strong transparent covering sleeve which not only protects the end but also makes the stitches visible for easy inspection before use
- PN2008(AP) comes with anti-panic features
- Abrasion resistant thimble to protect the loops from being damaged by metallic contact
- Available in lengths of 5m to 100m
Certification:
EN 353-2:2002, IS 3521(Part 4):2021
PN 2009, PN 2009(F), PN 2009(SA)
Key Features
- Above systems have one side loop for connector and a stop knot on the other side
- Abrasion resistant thimble at termination to protect the loops from being damaged by metallic contact
- The termination is cross-stitched, and is protected with a strong transparent covering sleeve which not only protects the end but also makes the stitches visible for easy inspection before use
- Available in lengths of 5m to 100m
Certification:
EN 353-2:2002, IS 3521(Part 4):2021
PN 2010, PN 2010 (AP)
Key Features
- Both these systems have one side loop for connector and a stop knot on the other side. The termination is stitched and protected with a strong transparent covering sleeve which not only protects the end but also makes the stitches visible for easy inspection before use
- PN2010(AP) comes with anti-panic features
- Abrasion resistant thimble at termination to protect the loops from being damaged by metallic contact
- Available in lengths of 5m to 100m
Certification:
EN 353-2:2002, IS 3521(Part 4):2021
